PreciseLine^® Adhesive Whiteboard Tapes
Vinyl precision solid-color bold thin line adhesive tape rolls and
Printed-stripe and arrows, opaque and transparent thin line tapes.

Perfect for sub-dividing, outlining and creating your own chart design on whiteboards, graphic presentation panels and applying thin bold pinstripe lines on hard surfaces, showing authority lines on organizational charts, etc. They're particularly fast and easy to use with our Ghost Grid^® whiteboards where you can tape perfectly straight, pre-measured precisely spaced lines on the first try for a neat, professional chart you'll be proud to display. Also use the tape for aligning die-cut magnetic and adhesive letters and numbers. Just remove the tape when finished for a neat row of copy.

They're ideal for animating MagnaMaps^™ (or any maps, floor plans, plot sites, etc.) with several colorful printed arrow and stripe pattern choices. Use them to add eye-catching drama to any graphic presentation board.

NOTE: The tape's adhesive is strong but removable from whiteboards and other non-porous, firm, clean, dry surfaces. iMPORTANT: For best adhesion, before applying the tape, make sure the board (or other surface to be taped) is completely dry and free of all oil, grease or other residue from cleaners, marker-dust or other contaminants. CAUTION: Tape removal may damage some fragile paper or loose paint surfaces.

PreciseLine^® vinyl tape is somewhat stretchable to accommodate moderately curved lines, but to prevent poor adhesion, it should not be applied while in a strongly stretched mode. For best practice: Do not pull the tape off the roll first, but start the tape line by applying the tape roll's end to the board surface, then slowly unwind the roll with minimum stretching, until the line is pressed in place and completed, then carefully trim and firmly press into place the tape ends to desired length (using the optional touch-knife offered below).