System code:
LND

Exact-Letter Individual Magnetic or Adhesive Letters & Numbers
Vinyl die-cut characters for both indoor and outdoor* use.
Order just the ones you want by size, case, style and color.

1 to 23"
24 colors
5 font styles

Magnetic characters cling tight to flat, smooth, clean steel** surfaces.
(steel whiteboards, buildings, cars, machines, doors, walls, trucks, etc.)
Press-on Adhesive characters stick to flat, clean, dry, smooth non-porous surfaces.

Order letters and numbers individually to fit your requirements. If you have special requirements, please Contact Us for a quotation.

MAGNETIC Individual die-cut vinyl Letters and Numbers

23 mil. gauge vinyl-laminated magnet sheet in 24 colors: 1" to 23" high

Fast and easy to use: they cling to your steel whiteboard or any ** clean smooth dry steel surace indoors or out.* They "lock on" magnetically to steel and become difficult to slide, but lift off and reposition easily. Colors are fade-resistent. Reuse them for years. They are permanently magnatized to retain full magnetic strength. Use a strip of PreciseLine tape for alignment. the character inch size specified is the height of the capital A.

*
In below-freezing temperatures, magnetic characters become brittle and may fracture when handled, but will stay functional if left undesturbed until above-freezing temperature is resumed.
**
They do not cling to some grades of stainless steel.
 

Press-on ADHESIVE individual die-cut vinyl Letters and Numbers

3 mil. gauge, offered in 24 colors from 1" to 23" high

Fast and Easy to use: Apply to clean, smooth, dry, non-porous surfaces indoors or out.

For sizes 1" to 2-1/2" high: lift the characters off the backer sheet with a blade tool to expose the adhesive, align them against a tape line on any clean, smooth, dry surface and press-apply them in place. Peel up tape when finished.

For sizes 3" to 23" high: Scissor-cut the character from the full sheet of characters. Peel off the backer sheet, exposing the adhesive, hold the character by the translucent front light-tack release sheet and position it for mounting, then use the smoothing tool (included with each order) to remove any air pockets and then remove the release sheet. Colors are fade-resistent.

Adhesive characters are removable but not reusable. Removal may damage paper surfaces.
For best adhesion on plastic surfaces, first clean the mounting area lightly with alcohol.
For best adhesion on glass, make sure the mounting area is thoroughly dry with no residue.
 
Scissor-cut letter
Expose adhesive
Hold release sheet
Position and smooth
Remove and release sheet
Your letter
 

1. Style: (click to change)

MagneticAdhesive

2. Size: (click to change) Please measure exactly the character size you need. They are custom made and not returnable.

1" ($.89 ea.)1-1/4" ($1.09 ea.)1-1/2" ($1.29 ea.)2" ($1.49 ea.)2-1/2" ($1.79 ea.)
3" ($1.99 ea.)4" ($2.99 ea.)5" ($3.99 ea.)6" ($4.99 ea.)7" ($6.49 ea.)
8" ($7.99 ea.)9" ($9.99 ea.)10" ($11.49 ea.)11" ($12.99 ea.)12" ($14.49 ea.)
13" ($15.99 ea.)14" ($17.99 ea.)15" ($19.49 ea.)16" ($21.49 ea.)17" ($23.99 ea.)
18" ($25.49 ea.)19" ($27.99 ea.)20" ($30.99 ea.)21" ($34.99 ea.)22" ($38.99 ea.)
23" ($43.99 ea.)Note: Size is the height of the capital "A" in the selected font. All characters are priced same as "A"

3. Color:


Black

Red

Blue

Green

Yellow

White

Orange

Gold

Silver

Pink

Purple

Gray

Brown

Beige

Tan

Burgundy

Berry

Rust

Dark Yellow

Light Blue

Dark Blue

Mint Green

Dark Green

Bright Orange
Note: These letters and numbers are made to order.
Minimum order is $50 for the first color plus $25 dollars for each additional color.

4. Font:


Helvetica

Cooper

Gill

Rockwell

Stone

5. Order Here:

Key Words here or Enter quantity of characters below:
QtyA
a
B
b
C
c
D
d
E
e
F
f
G
g
H
h
I
i
J
j
K
k
L
l
M
m
N
n
O
o
P
p
Q
q
R
r
S
s
T
t
U
u
V
v
W
w
X
x
Y
y
Z
z
0
1
2
3
4
5
6
7
8
9
$
&
/
#LND-M100: Magnetic, 1", Black, Helvetica ($.89 ea.)
Total Selected Characters: 0
Total Price of Selection: $0
Please Note: These letters and numbers are made to order. They are not returnable. Minimum order is $50 for the first color plus $25 dollars for each additional color.

Pre-Aligned Magnetic Steel White SignBoards for indoor use,
with printed "disappearing" GhostWhite letter-alignment Grid

GhostWhite 1/2" "disappearing" Alignment Grid heat-fused printed white ink porcelain-like steel whiteboard makes aligning and centering your lettering fast and accurate. The white GhostGrid "disappears" when you step back a little, giving you a beautiful SignBoard you will be proud to display anywhere with your message. 5 handsome frame choices. Top quality. Use SignBoard over and over for years. Everthing is removable (except the GhostGrid).

See price list below for working space on each board. Magnetic letters cling tight, do not slide, but lift off easily to reposition or reuse. Adhesive letters are removable, but not reusable. Boards come with 2 removable PreciseLine® tapes to sub-divide the board. It includes built-in patented wall hangers. Also available built into a Roll-Around Stand, with easel or custom printed with your images, logos, etc. Contact us for a quote.

Order Here:
Magnetic Steel Framed GhostGrid® SignBoards

(GhostWhite 1/2" lettering alignment grid
"disappears" when you stand back a little.)

Board hxw
overall
hxw sign
work space

Frame Colors and Options

Qty
2' x 2'22"h x 22"w$239#SGB-GG522XOptions
2' x 3'22"h x 34"w269#SGB-GG523XOptions
2' x 4'22"h x 46"w319#SGB-GG524XOptions
2' x 6'22"h x 70"w419#SGB-GG526XOptions
2' x 8'22"h x 94"w549#SGB-GG5296XOptions
3' x 2'34"h x 22"w269#SGB-GG532XOptions
3' x 3'34"h x 34"w349#SGB-GG533XOptions
3' x 4'34"h x 46"w379#SGB-GG534XOptions
3' x 6'34"h x 70"w579#SGB-GG536XOptions
3' x 8'34"h x 94"w659#SGB-GG5396XOptions
4' x 2'46"h x 22"w319#SGB-GG542XOptions
4' x 3'46"h x 34"w379#SGB-GG543XOptions
4' x 4'46"h x 46"w499#SGB-GG544XOptions
4' x 6'46"h x 70"w629#SGB-GG546XOptions
4' x 8'46"h x 94"w859#SGB-GG548XOptions
Each SignBoard includes 2 rolls of removable PreciseLine® black 1/8" x 324" tapes to sub-divide the board
IMPORTANT PLEASE MEASURE THE WALL SPACE where you want to mount the board you select to make sure it will fit. Also please measure to make sure it will clear your doorways, corners, staircases and elevators while being transported to your mounting site. Note: add six (6) inches to the board height x width for overall size including the shipping container.

For wall space requirements add two (2) inches to board size height and width.